Skip to main content
Translate
Default
English
Español
Français

User Access


Metalforming -  Ad - April 2022
asdf12
Tremco -  Ad - Spring Into Action With a Roof Inspection
Forum pinned ad
Leap -  Ad - Empowering Contractors
NRCA -  - Roofing week
Translate
Default
English
Español
Français

Wood Nailer.

« Back To Roofers Talk
Author
Posts
September 9, 2008 at 12:35 p.m.

kegolliday

The importance of a secure wood nailer never really entered my mind. Everybody makes sure the metal is tight, but if no-one pays attention to the nailer..... These three blow offs are both due to that one little detail..>>>

September 9, 2008 at 1:44 p.m.

kgrampp

never had a problem with it>>>

September 9, 2008 at 2:13 p.m.

A-T-T

What nailers are you talking about? Who put the nailers in? As the roofing contractor, shouldn't we check the conditions of the deck before we install our roofs?>>>

September 9, 2008 at 4:14 p.m.

pgriz

Jedd, is there a picture to go with your statement?>>>

September 9, 2008 at 5:09 p.m.

kegolliday

Yeah, but I have to resize it and I ain't had time. Being ripped seven ways to Sunday and will post soon as I can. Calm down there hopper.>>>

September 9, 2008 at 5:17 p.m.

kegolliday

Try this Never mind>>>

September 9, 2008 at 5:48 p.m.

A-T-T

It sure would be great if this site would automatically resize our photo's when we upload so we don't have too. (Just dreaming!!) ;)>>>

September 9, 2008 at 7:20 p.m.

kegolliday

This? This is Bollocks. I get it under 750 like it says, now I gotta get the pixels reduced. WTF!>>>

September 9, 2008 at 7:27 p.m.

kegolliday

. >>>

September 9, 2008 at 7:30 p.m.

kegolliday

Finally..... Guess I'm not as dumb as I look. >>>

September 9, 2008 at 7:32 p.m.

kegolliday

All three roofs lifted because the wood nailer failed. >>>

September 9, 2008 at 7:51 p.m.

A-T-T

Ohhh! Now I see what you're talking about. I thought you were talking about metal roofs. A failure in the edge metal would certainly be one cause of the failure but it also looks like the perlite was not adequately secured to the deck. If that deck i>>>

September 9, 2008 at 8:18 p.m.

kegolliday

Far as I could tell it was hot mopped. I reckon the boys laying the board were slacking off and not getting it down before it cooled........this IS south Louisianna>>>

September 9, 2008 at 8:39 p.m.

kegolliday

This here is 18x12 slate. 18X12 means 7" waterline giving you a 4"headlap. When they put this down they left no headlap at all, zero, zilch, relying totally on the underlayment to stop leaks. That may work for a while but the fact that there is no headl>>>

September 9, 2008 at 11:20 p.m.

Mike H

So is that second pic roof an old derbigum with the glass showing, or a granulated cap with most of the granules gone?

And I don't see me no seement in them thar brickees, so sirree. Wadda buncha dummies. Sorta like the roofer that glues a roof over>>>

September 9, 2008 at 11:26 p.m.

hatrick

i thought i was posting a new topic. well anyway, if you need a great roofer in charlotte contact me by weeks end, please.>>>


« Back To Roofers Talk
You must be logged in to reply to this topic.

Geocel - Banner Ad - May 2022
Translate
Default
English
Español
Français

User Access


NRCA -  - Roofing week
Directory pinned ad
Metalforming -  Ad - April 2022
Information pinned ad
Forum pinned ad
Tremco -  Ad - Spring Into Action With a Roof Inspection

Loading…
Loading the web debug toolbar…
Attempt #